Specifications
Electrical Requirements | 120 V~ / 60 Hz | |
|
| |
Fluid Capacity | 20 Gallons | |
|
| |
Maximum Flow | 5.28 Gallons per | |
Minute | ||
| ||
Fusible Link | Tested at 185° F. |
Unpacking
When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
List of contents
Description | Q’ty |
Middle Shelf | 1 |
Parts Washer Tank | 1 |
Pump with Cord and Switch | 1 |
Support Legs | 4 |
Swivel Casters | 4 |
Work Basket | 1 |
Instructions for putting into use
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
To prevent serious injury
from accidental operation:
Turn the Power Switch of the tool to its “OFF” position and unplug the tool from its electrical outlet before assembling or making any adjustments to the tool.
Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
Assembly
1.Assemble the four Legs (13) to the
Shelf (12) using Pan Screw (14) Washer (8) and Nut (9). Tighten loosely.
2.Attach the Legs / Shelf assembly to the Body (7) using Screw (14) Wash- er (8) and Nut (9). Tighten securely.
3.Tighten the Fasteners holding the
Shelf (12) to the Legs (13) securely.
4.Attach the Casters (37 and 38) to the Legs (13) using Washers (39) and Nuts (40). The Locking Casters
(37) should be installed on the front of the tool, where they can be easily reached.
5.Install the Pump Assembly (18) on the inside of the Body (7) using Screws (22), Washers (31 and 32) and Nuts (31). Ensure that the Switch Box (21) and Electric Cord (19) are on the outside of the Body (7). Tight- en fasteners securely.
SKU 98332 | For technical questions, please call | Page 8 |
