Charging Battery
Caution: Set the Spotlight On/Off Switch to the Off position before charging. Never charge the Battery for over 16 hours. Charge only until the red LED Battery Status Indicator shuts off. Do not operate the Spotlight while charging.
1.Open the Charging Port Cover (10) and plug the AC/DC Adapter (37) into the charging port underneath, and the other end into the 120 VAC electrical outlet.
The Charging Status Indicator turns red, indicating charging. The Battery will charge for approximately
When charging is complete, the Charging Status Indicator turns off, indicating charging is complete.
2.Unplug the Adapter from the power source and store again in the Adapter compartment of the Spotlight. Latch the Back Cover.
Note: Never attempt to charge the Battery (25) by using the Car Plug Adapter (36). This Adapter should only be used to power the spotlight when the battery is out of power.
Operation
Warning: Avoid eye damage. Do not shine light directly into the eyes of people or animals. This Spotlight emits a high intensity beam and could cause temporary blindness if shined directly into the eyes.
1.To turn the Spotlight on, hold the Rubber Grip handle with one hand, and push the On/Off Switch with the other. The first stop is the low setting and the second stop is the high setting.
2.To check the battery charge status, press the Battery Status Button (34) with the light on. Note the number of yellow LEDs that illuminate. If there are 3, the unit is almost fully charged. If there is only one, switch the unit off and recharge it.
3.To position the Spotlight at rest, move the Stands to the desired position.
4.To turn the Spotlight off, pull the On/Off Switch back.
5.A 12VDC device that draws less than 10 Amps can be plugged into the 12V Inlet/Outlet (8) and powered by this unit’s battery. This will only work while the ON/OFF switch is in its OFF position. Never try to power a device that uses more than 10 Amps.
SKU 93255 | For technical questions, please call | Page 5 |
