SPECIFIC SAFETY RULES FOR THIS PRODUCT
1.Maintain labels and nameplates on the welder. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
2.Maintain a safe working environment. Keep the work area well lit. Make sure there is adequate surrounding workspace. Always keep the work area free of obstructions, grease, oil, trash, and other debris. Do not use a power tool in areas near flammable chemicals, dusts, and vapors. Do not use this product in a damp or wet location.
3.Avoid unintentional starting. Make sure you are prepared to begin work before turning on the Welder.
4.Unplug before performing maintenance. Always unplug the Welder from its electrical outlet before performing and inspection, maintenance, or cleaning procedures.
5.Never leave the Welder unattended while energized. Turn power off if you have to leave the Welder.
6.Maintain a safe working environment. Keep the work area well lit. Make sure there is adequate surrounding workspace. Always keep the work area free of obstructions, grease, oil, trash, and other debris.
7.Prevent eye injury and burns. Wearing and using ANSI approved personal safety clothing and safety devices reduce the risk for injury.
•Wear ANSI approved safety impact eye goggles with a welding helmet featuring at least a number 10 shade lens rating. Any additional safety equipment worn on the head (such as a respirator or hearing protector) must fit properly and safely underneath the welding helmet without decreasing the helmet’s effectiveness.
•Leather leggings, fire resistant shoes or boots should be worn when using this product. Do not wear pants with cuffs, shirts with open pockets, or any clothing that can catch and hold molten metal or sparks.
•Keep clothing free of grease, oil, solvents, or any flammable substances. Wear dry, insulating gloves and protective clothing.
•Wear an approved head covering to protect the head and neck. Use aprons, cape, sleeves, shoulder covers, and bibs designed and approved for welding and cutting procedures.
•When welding or cutting overhead or in confined spaces, wear flame resistant ear plugs or ear muffs to keep sparks out of ears.
8.Prevent accidental fires. Remove any combustible material from the work area.
•When possible, move the work to a location well away from combustible materials. If relocation is not possible, protect the combustibles with a cover made of fire resistant material.
SKU 91811 | For technical questions, please call | Page 5 |
