Chief Manufacturing CMA471, CMA470 installation instructions Installation

CMA470, CMA471 Installation Instructions

INSTALLATION

WARNING: ELECTRICAL SHOCK HAZARD! Use this product only with low voltage wiring. Check with local codes before using for any other installation.

WARNING: IMPROPER INSTALLATION CAN LEAD TO MOUNT FALLING CAUSING SEVERE PERSONAL INJURY OR DAMAGE TO EQUIPMENT! The equipment must be assembled and installed by qualified service personnel.

1.Install CMA-440/-450/-455 or CMS-440 (accessory not included). See installation instructions included with the accessory.

2 (D) x4

Figure 1

2.Install box (A) with four screws (D) (See Figure 1). Tighten securely.

NOTE: Box shown installed to CMS-440. CMA accessories similar.

3.Secure lid to box (A) with two screws (D) (See Figure 2). Tighten securely.

3 (D) x 2

Figure 2

4.Connect ground wire to grounding screw. (See Figure 3)

Grounding

Screw

(CMA-470 shown)

Figure 3

NOTE: Knockouts are provided for ease of installation. Any open knockout needs to be plugged, using parts (B) or

(C). Additional 1/2" (B) or 1" (C) plugs may be purchased at a local store, if needed.

6