Installation Instructions

CTA-225

IMPORTANT WARNINGS and CAUTIONS!

WARNING

A WARNING alerts you to the possibility of serious injury or death if you do not follow the

 

instructions.

 

 

CAUTION

A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow

 

the corresponding instructions.

 

 

WARNING

Improper installation can result in serious personal injury! Make sure that the mounting surface

 

can support a redundant weight factor five times the total weight of the equipment: if not,

 

reinforce the mounting surface structural members before installing the mount.

 

 

WARNING

Be aware of the potential for personal injury or damage to the equipment if it is not adequately

 

mounted.

 

 

WARNING

The installer is responsible for verifying that the mounting surface to which the CTA-111 is

 

anchored will safely support the combined load of all attached components or other equipment.

 

 

WARNING

The combined weight of the TV/monitor and all attached components and equipment placed on a

 

Chief Wall Arm must not exceed 300 lbs. (136.1 kg), the maximum support weight of the CTA-225.

 

 

WARNING

Watch for pinch points. Do not put your fingers between movable parts.

 

 

CAUTION

Check the unit for shipping damage before you begin the installation.

 

 

CONTENTS

 

CTA-225 – SPECIFICATIONS

2

CONTENTS

3

INSPECT THE UNIT BEFORE INSTALLING

3

PARTS

4

TOOLS REQUIRED FOR INSTALLATION

5

INSTRUCTIONS

5

Installing Top Stud Spanning Adapter to Wall

5

Attaching Stud Spanning Adapter to Wall Arm

6

Attaching Wall Arm to Wall-Mounted Top Stud

 

Spanning Adapter

6

Attaching Bottom Stud Spanning Adapter to Wall

7

Attaching Front Cover

7

Connecting NPT Pipe or Nipple to Wall Arm

7

INSPECT THE UNIT BEFORE INSTALLING

Unpack the carton. Carefully inspect the parts for shipping damage. Verify contents listed in Table 2.

If you are missing any of the listed parts, contact Customer Service at: 1-800/582-6480.300.

Table 2. Shipping Contents

ITEM

DESCRIPTION

QTY

10

Wall Arm

1

20

16” Spanning adapter

2

30

Front Cover

1

40

5/16 X 2.5” Lag Bolt

4

50

5/16 Flat Washer

4

60

M8 Flat Washer

6

70

M8 Lock Washer

6

80

M8 Hex Nut

6

90

M4 X 8mm Phillips Head Cap Screw

4

100

M6 X 6mm Set Screw

1

110

M3 Allen Key (not shown)

1

3

Page 3
Image 3
Chief Manufacturing CTA-225 installation instructions Contents, Inspect the Unit Before Installing