INSTALLATION INSTRUCTIONS
FDP SERIES
SMALL FLAT PANEL DISPLAY
DUAL SCREEN POLE MOUNT
Exclusive Q2™ Mounting System
Prior to assembly, unpack carton completely and verify contents.
If you are missing any of the following components, please contact Customer Service at
|
| Figure 1 |
|
(2) | FDP | (2) | ¼” Flat Washer |
(2) | (8) | ||
|
| (8) | ½” X ½” Nylon Spacer |
BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY
The FSP will fit on any 1/1/2” to 2” O.D. pipe including 1 ½”NPT.
Flat Panel Displays are Extremely Fragile.
CAUTION! If Monitor Uses a Screw Size Other Than M4 X 10mm (M4 X 20mm), DO NOT USE M4 Screws Provided. Monitor Damage Could Occur.
Interface Bracket Installation:
1. See installation procedures accompanying your mounting bracket.
Optional Latching Flag Placement:
1.Remove Phillips head screw, Nylock nut and latching flag (see Figure 2).
2.Reposition latching flag and secure using Phillips head screw, Nylock nut.
Remove screw and nut
Move latch
Figure 2 | 01/26/04 | |
|
CHIEF MANUFACTURING INC.
