Chief Manufacturing FSA-100, KSA-1009 installation instructions Install Security Set Screws, Option

Installation Instructions FSA/KSA-1009

INSTALL SECURITY SET SCREWS

The security set screw is used to secure the pivot-pitch wall mount. You will need the security hex keys (provided) to install the security set screws.

There are two different wall plates, which require different security requirements. Select the option that applies to your configuration.

Option I

NOTE: If your wall plate uses a 1/4-20 set screw, replace it with a 1/4-20 x 5/8” security set screw

(40)and a 1/4-20 x 1/4” security screw (30). The existing set screw in the wall plate is too long to be used with the 1/4-20 x 1/4” security screw.

1.Verify that you have the correct parts.

2.Remove the existing 1/4-20 x 1/4” set screw from the wall plate.

3.Install a 1/4-20 x 5/8” security set screw (40) and a 1/4-20 x 1/4” security screw (30) into the wall plate in the order shown in Figure 6.

Option II

1.Verify that you have the correct parts.

2.Remove the existing 5/16-18 x 3/4” set screw from the wall plate.

3.Install the 5/16-18 x 3/4” security screw (50) in the wall plate (see Figure 7).

1/4-20 x .625 Set Screw

1/4-20 x .25 Security Screw

Figure 6. Install Security Set Screws (Option I)

5/16-18 x .75 Security Set Screw

Figure 7. Install Security Set Screws (Option II)

6