Installation Instructions | Model: FTR Series |
TOOLS REQUIRED FOR INSTALLATION
•Drill
•1/8" drill bit (wood stud installation)
•3/8" drill bit (drywall installation)
•Hammer (drywall installation)
•Phillips screwdriver, #2
NOTE: Other tools may be required depending on your method of installation.
PARTS
After unpacking carton, inspect and verify contents (See Figure 1). If any listed parts are missing or damaged, contact Chief Customer Service at
Table 1: Parts
Item | Description | Qty |
10 | PLATE, Wall | 2 |
|
|
|
20 | ANCHOR, Hollow Wall, | 4 |
|
|
|
30 | WASHER, Flat, Standard Machine Screw, #10 | 4 |
|
|
|
40 | SCREW, Phillips Pan Head Sheet Metal, | 2 |
| #10 x |
|
|
|
|
(10) |
(20) |
(30) |
(40) |
Figure 1: Parts
3
