Installation Instructions |
CONTENTS |
|
DIMENSIONAL DRAWING | 2 |
TOOLS REQUIRED FOR INSTALLATION | 3 |
INSPECT UNIT BEFORE INSTALLING | 3 |
SPECIFICATIONS | 3 |
INTRODUCTION | 4 |
PARTS | 5 |
PARTS (Continued) | 6 |
SECURE WALL BRACKET | 7 |
INSTALLATION | 7 |
100mm x 100mm Flush and Recessed Mount |
|
Installation | 7 |
Flush Mount Installation | 7 |
Recess Mount Installation | 8 |
Interface Bracket Installation | 9 |
200mm x 100mm Pattern | 10 |
300mm x 100mm Pattern | 10 |
300mm x 200mm Pattern | 11 |
400mm x 200mm Pattern | 11 |
200mm x 200mm Pattern | 12 |
Attach Display to Mount (Centris Bracket) | 13 |
ATTACH MOUNT TO WALL BRACKET | 13 |
CABLE MANAGEMENT | 14 |
ADJUSTMENTS | 14 |
Lateral Tension Adjustment | 14 |
Pitch Tension Adjustment | 14 |
TOOLS REQUIRED FOR
INSTALLATION
Electric drill and bit set
Hex wrench set
Phillips screwdriver
Level
NOTE: Other tools may be required depending on your display, JWP configuration and method of installation.
INSPECT UNIT BEFORE
INSTALLING
WARNING: Watch for pinch points. Do not put your fingers between movable parts.
1.Carefully inspect mount for shipping damage. If any damage is apparent, call your carrier claims agent and do not continue with installation until carrier has reviewed damage.
NOTE: Read all instructions before starting installation.
2.Lay out components to ensure you have all required parts before proceeding (see PARTS on page 6). If you are missing any listed parts, contact Customer Service at:
SPECIFICATIONS
Table 1. JWP Specifications
Depth from |
|
Wall | 3.35” (85.07mm) |
|
|
Maximum |
|
Extension | Not Applicable |
Dimensions | 6.0” x 8.32” x 3.35” |
W x H x D | (152 x 211.43 x 85.07mm) |
|
|
Weight | 75 lbs (34kg) |
Capacity | |
|
|
3
