I N S T A L L A T I O N I N S T R U C T I O N S
Medium Flat Panel
Pivot/Pitch Wall Mount
Model JWP-V
The JWP Pivot/Pitch wall mount is designed for mounting a medium sized flat panel display. The mount can be tilted up and down to 15° of center as well as pivot left and right.
The JWP is shipped with the VESA® 100mm/100mm Centris™ interface which is compatible with most medium flat panels.
To accommodate other mounting patterns in displays, the JWP comes with a VESA Plate that accommodates other VESA mounting patterns.
By design, the JWP can be configured to fit your medium flat panel display, providing that your display does not exceed the specified weight rating.
BEFORE YOU BEGIN
CAUTION: To prevent damage to your display and/or the JWP, which could affect or void factory warranty, thoroughly study all instructions and illustrations before you begin to install the mount. Pay particular attention to ALL Warnings and Cautions in this document.
The maximum weight allowable for use with the JWP wall mount is 75 lbs (34 kg).
The JWP wall mount is designed to be installed using wall studs or supporting framework. The structure to which the JWP wall mount is anchored must be capable of supporting five times the total weight of the mount and all attached equipment.
If you have any questions about this installation, contact Chief Manufacturing at
CHIEF MANUFACTURING INC. | |
©2006 Chief Manufacturing | |
8401 EAGLE CREEK PARKWAY, STE. 700 | www.chiefmfg.com |
SAVAGE, MINNESOTA 55378 USA | 12/06 |
|
|
|
|
