Installation Instructions |
| Model: | |
3 | Adjust Lower device Mounting Brackets | ||
device | 1. | Position two device holding brackets (20) so that | |
| they are at their outermost position. (see detail in | ||
|
| figure at left) | |
| 2. | Slide device into rack until resting on two lower | |
|
| device mounting brackets (30). | |
| 3. | Slide two device holding brackets (20) forward | |
|
| until they contact device. | |
30 | 4. | Tighten two | |
20 | |||
|
|
10
70
4 | Install Upper Device Mounting Brackets | |
60 (2 places) | ||
| WARNING: IMPROPER INSTALLATION CAN | |
| LEAD TO DEVICE FALLING! All mounting brackets | |
| must be securely fastened to device rack. | |
70 (4 places) | IMPORTANT ! : Make certain device holding | |
| brackets (20) are oriented as shown in figure at | |
| left. | |
| 1. Install two upper device holding brackets (20) into | |
| slots in upper device mounting brackets (30) | |
30 | using two | |
NOTE: DO NOT tighten hardware at this time. | ||
| ||
| 2. Position two upper device holding brackets (20) | |
| so that they are at their outermost position. (see | |
| detail in figure at left) | |
| 3. Secure two upper bottom device mounting | |
| brackets (30) to device rack (10) using two | |
| x 5/8" round head carriage bolts(60) and two 10- | |
| 24 Nylock nuts (70). | |
| device | |
20 | 10 |
5