Chief Manufacturing PACPC1 Installation, Attaching to Drywall, Attaching to Wood Stud

Installation Instructions			PACPC1
INSTALLATION
Attaching to Drywall			(D)
1.	Attach bracket (D) to drywall using two #6 x 1" drywall
		screws (L). (See Figure 1)	(C)
NOTE: Do NOT overtighten drywall screws.
2.	Proceed to Installing Conditioner.
		(D)
			(K) x 2
			Conditioner to be Attached Horizontally
		(L) x 2
		Figure 1
Attaching to Wood Stud
1. Drill two 0.08" pilot holes into wood stud. (See Figure 2)
2.		Attach bracket (D) to wall using two #6 x 1" drywall
		screws (L).
3.		Proceed to Installing Conditioner.	Conditioner to be Attached Vertically
		Wood
		Stud	Figure 3
		1	2. Attach pole clamp (B) around the pole to the pole mount
			bracket using two 1/4-20 x 1-1/4" buttonhead security
			screws (H), four 1/4" washers (N), and two spacers (M).
		(D)	(See Figure 4)
	2	(L) x 2	(B)
		Wall
			(N) x 4
			(M) x 2
		Figure 2
Attaching to 1-1/2" NPT Pole
1.		Attach bracket (D) to pole mount bracket (C) using two
		1/4-20 x 1/4" buttonhead screws (K). (See Figure 3)	1-1/2" NPT Pole
NOTE: The bracket can be installed for either horizontal or
			(H) x 2
		vertical attachment of the conditioner. (See Figure 3)	(Horizontal Attachment Shown)

Figure 4

5