Chief Manufacturing TPA-100 Tools Required for Installation, Assemble the Finishing Cover

Installation Instructions TPA-100

TOOLS REQUIRED FOR INSTALLATION

•5/32” Allen wrench, security (provided)

•Phillips screwdriver

INSTALLATION

To install the finishing cover, do the following:

Assemble the Finishing Cover

Assemble the finishing cover, as follows:

NOTE: If security screws are used, use the 5/32” security Allen wrench (30).

1.Using three 10-24 x 3/8” pan head cap screws (40) or three 10-24 x 3/8” button head cap screws (50), attach the top cover (20) frame onto the pole mount cover (10). See Figure 2.

2.Repeat Step 1 to attach the bottom cover (20) frame to the pole mount cover (10).

40

or20 50

10

Figure 2. Assemble the Finishing Cover

60
or
70	Pole
Install the Finishing Cover

Install the finishing cover, as follows:

1.Place the pole mount cover (10) over the pole mount and pole (see Figure 3).

NOTE: If security screws are used, use the 5/32” security Allen wrench (30).

2. Using two 10-24 x 3/8” pan head self-tapping screws	10
(60) or two 10-24 x 1/2” sheet metal security screws	Mount
(70), attach the assembled pole mount cover (10) to
the mount at the top. See Figure 3.

3.Repeat Step 2 to attach the assembled pole mount cover (10) to the mount at the bottom.

Figure 3. Install the Finishing Cover

2