Christie Digital Systems manual F E At U R E S, Mirage 10000 Specifications, Head Offices

Mirage 10000 • Specifications

Brightness

•10000 ANSI lumens +/- 10%

•Over 90% brightness uniformity

Contrast Ratio

•300:1 ANSI, 500:1 full field

Resolution

•1024 x 768 true resolution with resizing capabilities to scale down from 1280 x 1024 and scale up from 640 x 480

•16.7 million displayable colors

•3-DMD™ Optical System (SLIC™)

•13-bit user selectable gamma table

Horizontal Frequency

•15kHz to 120kHz

Vertical Frequency

•24Hz to 120Hz

Dot Clock

•160 MHz

Stereoscopic Source Compatibility

•Active stereo XGA with vertical refresh rates up to 120Hz, with one field delay, without frame dropping

•In 3D mode, inputs must be in RGB

Enhanced Feature Set

•Variable lamp power

(1.4 - 1.9kW on lamp)

•Intuitive on-screen display (OSD)

•Service functions can be password protected

•Multiple language support

•100 channel memories

•Dark Interval Adjustment (DIA™)

•Auto set-up feature

Control/Networking

•Auto power-up

•Dual RS232 and dual RS422 communication port

•IR Remote keypad

Standard Accessories

•IR (infrared) remote keypad - includes batteries

•User manual

•Warranty Registration Card

•4 eyebolts for hoisting: 1/2"-13 x 1 1/2"

Optional Accessories

•Wired two-way remote controller (RS422) with LCD display

•Remote IR sensor

•Replacement lamp kit

•Multi-standard video decoder

(NTSC 3.58, NTSC 4.43, PAL,PAL 60, PAL M, PAL N, SECAM)

•DVI/DFP module

•Digital HDTV module (SMPTE 292)

•Service manual

•Vista compatible analog input modules

•Compatible with selected third party switchers

•Librarian communication software

F E AT U R E S

• Christie-designed electronics provide the	• The Mirage 10000 is fully digital and	• Intelligent Lens System (ILS™)
most advanced digital signal processing	requires only one projector to	recalls focus, zoom and positioning
for all types of stereo images.	produce stereoscopic images.	settings of each input source.

Head Offices

USA

10550 Camden Drive

Cypress, CA 90630

PH: +714-236-8610

FX: +714-503-3385

Toll free: (800) 407-7727 (NA only) sales-us@christiedigital.com

CANADA

809 Wellington Street North Kitchener, Ontario N2G 4Y7 PH: +519-744-8005

FX: +519-749-3136

Toll free: (800) 265-2171 (NA only) sales-canada@christiedigital.com

Field Interchangeable Optional Lenses

•Fixed short throw lens: 0.8:1

•Zoom lenses: 1.5-2.5:1, 2.5-4:1, 4-7:1

•Vertical lens offset: Up to 100% for off-axis projection

•Horizontal lens offset: Up to 75%

•Intelligent Lens Systems (ILS™); automatic adjustment of zoom (with zoom collar), focus, vertical and horizontal lens offset

•Lens mount tilt adjustment

•Built-in light shutter

•Screen size 72" to 480"(1.8 m – 12.2m) diagonal image size (lens dependent)

•Motorized lens mount

Dynamic Scaling

•Resizing processing for computers and workstations up to 1600 x 1200 resolution

•Independent horizontal and vertical image size adjustment for graphics and video

Inputs

•Input 1: Analog RGB 5 BNC for RGBHV, YPrPb, YCbCr and YUV

•Input 2: Optional plug-in input modules

•Separate, composite sync and sync- on-green compatible

•HDTV Tri level sync compatible for all known HDTV formats

•Front and rear IR receiver

•Optional 2-way controller RS422

•Built-in backlit keypad

Lamp Specifications

•1900W Xenon® lamp

•Color temperature range 3200K to 9300K

•Over 1000 hours of lamp life

•User replaceable lamp

Power Requirements

•Voltage range: AC 220 - 240V +/- 10%

•Line frequency: 50 - 60 Hz nominal

•Power consumption: 2800W maximum

•In-rush current rating: 60A maximum

•Current rating: 14 Amps maximum at 200VAC

Environmental

•Operating temperature: 0 - 35° C

•Operating humidity: 20 - 80% non- condensing

Diagnostics

•Built-in diagnostics LCD display indicates operational status and error messages

•Power and status LEDs

•Full diagnostics through RS232 9-pin D connector

Size and Weight

•220 lbs. (100 kg)

•29" W x 54" L x 16" H

•73.7cm W x 137.2cm L x 40.6cm H

•Serial Digital Input (SMPTE 259M/ CCIR 601)

•10-bit ADP (Advanced Digital Processing) used in non-stereo mode

•Arbitrary Gamma Table Software

•Wired remote backlit keypad

•Optional sound reduction kits

Regulatory Approvals

•Safety: CSA C22.2 No. 950, UL 1950, EN609050 European Norm "Safety of Information Technology Equipment"

•47CFR 2 and 15 (FCC) Class A - US - Conducted and Radiated Emissions Standards

•CRC 1374 (DOC) Class A - Canadian - Conducted and Radiated Emissions Standards

•Emissions per EN50081-1; Immunity per EN50082-1

•ESD Susceptibility: EN61000-4-3 Level 3

•Radiated Susceptibility: EN61000-4-3 Level 3

•EFT/Burst: EN61000-4-4 Level 4

•Input transient protection: EN61000-4-5 Level 3

Warranty

•1 year parts and labor

•Accessories: One year

Branch Offices

UNITED KINGDOM PH: +44 118 977 8000 FX: +44 118 977 8100

sales-europe@christiedigital.com

SINGAPORE

PH: +65 6877-8737

FX: +65 6877-8747 sales-singapore@christiedigital.com

FRANCE

PH: +33 (0) 1 47 48 28 07

FX: +33 (0) 1 47 48 26 06

Mobile: +33 (0) 6 76 47 43 62 sales-france@christiedigital.com

GERMANY

PH: +49 2161 664540

FX: +49 2161 664546 sales-europe@christiedigital.com

CHINA

PH: +86 21 6278 7708

FX: +86 21 6278 7707 sales-china@christiedigital.com

Due to constant research,

Copyright 2002 Christie Digital Systems, Inc.. All rights reserved. All brand names and product names are trademarks, registered	specifications are subject to	WWW.CHRISTIEDIGITAL.COM
trademarks or tradenames of their respective holders. Canadian manufacturing facility is ISO 9001 certified. MIL4999	change without notice.

July 02-NA