APPENDIX

TROUBLESHOOTING

Before calling your dealer or service center for assistance, check matters below once again.

1.Make sure you have connected a projector to your computer or video equipment as described in section "CONNECTING PROJECTOR" on pages 11 ~ 13.

2.Check cable connection. Verify that all computer, video and power cord are properly connected.

3.Verify that all power is switched on.

4.If a projector still does not produce an image, re-start your computer.

5.If an image still does not appear, unplug a projector from your computer and check your computer monitor's display. Problem may be with your graphics controller rather than with a projector. (When you reconnect a projector, be sure to turn computer and monitor off before you power up a projector. Power equipment back on in order of : Projector and computer.)

6.If problem still exists, check following chart.

Problem:

Try these Solutions

No power.

● Plug a projector into your AC outlet.

 

● Make sure READY Indicator lights.

 

● Wait 90 seconds after a projector is turned OFF when turning a projector back on.

 

NOTE : After pressing Power ON-OFF button to OFF, make sure a projector works as

 

follows:

 

1. LAMP indicator lights bright and READY indicator turns off.

 

2. After 90 seconds, READY indicator lights green again and a projector may be

 

turned on by pressing Power ON-OFF button.

 

● Check WARNING TEMP. indicator. If indicator flashes red, a projector cannot be turned

 

on.

 

(See "TURNING ON/OFF PROJECTOR" section on page 17.)

 

● Check Projection Lamp. (Refer to page 38.)

 

 

Image is out of

● Adjust focus of a projector.

focus.

● Make sure a projection screen is at least 5.0’ (1.5m) from a projector.

● Check Projection Lens to see if it needs cleaning.

 

 

NOTE : Moving a projector from a cool temperature location to a warm temperature location

 

may result in moisture condensation on Projection Lens. In such an event, leave a

 

projector OFF and wait until condensation disappears.

 

 

Picture is Left/Right

● Check Ceiling / Rear feature. (See “SETTING” section on page 35.)

reversed.

 

 

 

Picture is

● Check Ceiling feature. (See “SETTING” section on page 35.)

Top/Bottom

 

reversed.

 

 

 

Some displays are

● Check Display feature.(See “SETTING” section on page 35.)

not seen during

 

Operation.

 

 

 

No image.

● Check connection between your computer or video equipment and a projector.

 

● When turning a projector on, it takes about 30 seconds to display an image.

 

● Check system that you select is corresponding with your computer or video equipment.

 

● Make sure temperature is not out of Operating Temperature (5°C ~ 35°C).

No sound.

● Check audio cable connection from audio input source.

 

● Adjust audio source.

 

● Press VOLUME (+) button.

 

 

40

Page 39 Page 41
Page 40
Image 40
Christie Digital Systems 38-VIV212 user manual Troubleshooting, Appendix
Page 39 Page 41

38-VIV212 specifications

Christie Digital Systems is renowned for its innovative display solutions, and the 38-VIV212 is a powerful addition to their lineup. This advanced video wall solution is designed to meet the demands of various applications, including retail, control rooms, corporate environments, and immersive installations. One of the standout features of the 38-VIV212 is its remarkable 4K UHD resolution, ensuring crystal-clear image quality that captivates audiences and enhances the viewing experience.

With its ultra-narrow bezels, the 38-VIV212 provides an almost seamless visual experience. This is crucial for multi-screen displays, as it minimizes distractions and enhances continuity across the screen array. The display's image processing capabilities also allow for edge blending and image warping, giving users the flexibility to create striking visuals that can adapt to any environment.

The 38-VIV212 is equipped with advanced LED backlighting technology, which not only boosts brightness but also improves energy efficiency. This means lower operational costs and a reduced environmental footprint, making it an appealing option for businesses focused on sustainability. The display boasts a high contrast ratio, ensuring that dark scenes appear rich and vibrant, while bright scenes remain strikingly clear.

Another noteworthy characteristic is the 38-VIV212’s wide viewing angles. This feature ensures that colors and details remain consistent, even when viewed from off-angles, making it ideal for large audiences and diverse viewing environments. Additionally, Christie Digital Systems incorporates robust color calibration technology that guarantees consistent color reproduction across multiple displays in a video wall setup.

The 38-VIV212 is also designed with versatility in mind. It supports a variety of input formats, allowing easy integration into different systems and setups. The display is compatible with advanced content management systems, enabling real-time updates and dynamic content delivery. This flexibility is essential for environments that require immediate changes or updates to the displayed information.

In conclusion, the Christie Digital Systems 38-VIV212 stands out as a premium solution for those seeking high-performance display capabilities. Its impressive resolution, ultra-narrow bezels, energy-efficient design, and versatility make it a top choice for enhancing communication and engagement in various professional settings. Whether for a corporate boardroom or a bustling retail environment, the 38-VIV212 delivers exceptional quality and performance, ensuring that every visual message leaves a lasting impact.
Top Page Image Contents