Christie Digital Systems 38-VIV306-01 Preparation Lens Installation, Positioning Projector

PREPARATION

LENS INSTALLATION

Before setting up a projector, install Projection Lens on

Projector.

1. Before installation, check where a projector is used and prepare a suitable lens. For specifications of a Projection Lens, contact sales dealer where you purchased a projector.

2. For installation, refer to lens replacement and installation
manual.
NOTE;	COVER CAP
When installing the lens, remove the cover cap in the
projector.

POSITIONING PROJECTOR

This projector is designed to project on a flat projection

surface.

SCREEN

ROOM LIGHT

Brightness in a room has a great influence on picture quality. It is recommended to limit ambient lighting in order to provide best image.

LENS SHIFT ADJUSTMENT

Projection lens can be moved up and down with motor-driven lens shift function. This function makes it easy to provide projected image where you want. U/D ratio can be adjusted 10 : 0 ~ 1 : 1 (refer to figure below.). Refer to P 21 for operation.

Highest (10 : 0) Lowest (1 : 1)

10 : 0

1

1

9