Brightness
•8500 ANSI lumens (+/- 10%)
•90% brightness uniformity across the screen
Contrast Ratio (1.5-2.2:1 zoom lens)
•400:1 ANSI, 800:1 full field
Resolution/Digital Processing
•3-chip 0.9" DMD™‚ (Digital Micromirror Device) system
•True SXGA 1280 x 1024 chip resolution
•13-bit user selectable gamma table
•More than 1 billion displayable colors
Dynamic Scaling
•Resizing capabilities to scale down from 1600 x 1200 and up from 640 x 480 to SXGA (1280 x 1024) resolution
•Independent horizontal and vertical scaling adjustment for graphics and video inputs
HDTV/DTV Compatibility
•Full HDTV/DTV compatibility on analog RGB/YPbPr inputs
•Accepts 480i, 480p, 576i, 576p, 720p, 1035i, and 1080i formats at all applicable frame/field rates
•Accepts 1080p at 24, 25 and 30Hz frame rates
•Optional HDTV Serial Digital Input Module
Keypads
•Standard hand-held IR backlit remote keypad
•Front and rear infrared sensors
•Built-in backlit keypad
•Optional RS422 two-way remote controller with LCD display using 6-pin XLR connector with range of 3000ft
•Optional wired backlit remote keypad with 3-pin XLR connector
Variable Lamp Power Supply/Light Output Control (LiteLOC™)
•"Auto Brightness" mode to maintain constant brightness over time
•"Lamp Conserve" mode to extend the lamp life
•"Max Brightness" mode for maximum light output
Power Requirements
•Line voltage: 200 VAC to 240 VAC +/- 10% @ 50/60Hz
•Power consumption: 2200W maximum
•Thermal dissipation: 7250BTU/hr
•Operating current: 12A maximum
Weight and Size
•99 lbs (45 kg)
•22.28" W x 30.1" L x 11.88" H excluding handles
•56.6cm W x 76.5cm L x 30.2cm H excluding handles
•Fitted with a digital interface, the S9 projects from source to screen without signal conversion.
Horizontal Frequency Range
•15 to 120kHz
Vertical Frequency Range
•24 to 120Hz
Field Interchangeable Optional Lenses
•Fixed short throw lens: 1.2:1
•Zoom lenses: 1.5-2.2:1, 2.2-4:1, and 4-7:1
•Up to 130% of vertical lens offset for off-axis projection
•Up to 80% of horizontal lens offset
•Compatibility with VistaGraphX lenses: 0.8:1, 2.5-4:1, 4-7:1 (adapter required)
•Screen size: 5’ – 40’ + (1.8m - 12.2m) diagonal
Lens Mount
•Manual horizontal and vertical lens offset, focus and zoom adjustments
•"Bayonet-style" lens insertion system
•Scheimpflug (lens mount tilt) adjustment
•Built-in light shutter
Inputs
•Built-in RGB/YUV/YPbPr inputs allowing separate H and V syncs, composite sync and sync-on-green/luma
(5 BNC connectors)
•Multi-standard Video Decoder Module (NTSC 3.58, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM) with one composite video input (BNC and RCA connectors) and one S-video input (two BNC and 4-pin mini-DIN connectors)
•Optional input module slot
•Full compatibility with third party switchers
•Robust, rugged and reliable - 99 lbs and 8500 ANSI at true SXGA resolution.
Control/Networking
•Third party control system and switcher compatibility
•Dual RS232 ports for computer control, with loop-through for connection of multiple projectors
•Dual 6-pin XLR RS422 ports for connection of optional LCD two-way controllers and loop-through to multiple projectors up to 3000ft
•ChristieNET™ compatible
Diagnostics
•Built-in LCD diagnostic display indicates operational status and error messages
•Power and status LED
•Full diagnostics through RS232 9-pin D connector
Graphical User Interface
•Auto set-up feature
•"Direct Access" intuitive user interface for complete projector control in 5 world languages
•On-screen user-placeable menus to fit different image aspect ratios
(4:3, 5:4, 16:9, etc.)
•On-screen help menus
•100 channel memories
•Auto power up feature
Lamp Specification/Color Temperature
•1500W CERMAX® Xenon illumination system
•Pre-aligned lamp module
•Constant color temperature over the lamp life
•Color temperature adjustment range: 3200K to 9300K
•User replaceable lamp within 5 minutes
•Lamp lifetime: 1000 hours (typical)
•Full HDTV/DTV compatibility.
Standard Accessories
•IR remote keypad with batteries
•User’s manual
•Eye bolt kit
Optional Accessories
•Serial Digital Input (SMPTE 259M/ CCIR 601) with loop-through feature
•Digital HDTV Input module (with loop- through feature) compatible with all known HDTV formats
•DVI/DFP Input module
•10-bit ADP (Advanced Digital Processing) module
•Wired remote keypad
•Motorized lens mount upgrade
•RS422 two-way remote LCD controller
•Replacement lamp module
•Remote infrared sensor
•Service manual
•Librarian communication software
•Arbitrary Gamma software for user-definable gamma tables
•MIL-STD ruggedized transit case
•Stacker kit
Regulatory Approvals
•CSA/UL EN60950
•FCC and CISPR 22 class A, EN50024 EMI/EMC approvals
Warranty
•Two years parts and labor on projector
•One year on projector light engine
•Accessories: One year
•Extended warranty available
Third Party Test Criteria
•ISTA, IEC 60068-2-64, ASTM D4169-96, MIL STD 810F (Shipping Vibration & Shock, while in Christie Roadster Transit Case)
809 Wellington Street North Kitchener, Ontario N2G 4Y7 PH: 519-744-8005
FX: 519-749-3136
Toll free: (800) 265-2171 (NA only) sales-canada@christiedigital.com
Branch Offices
UNITED KINGDOM PH: +44 118 977 8000 FX: +44 118 977 8100
sales-europe@christiedigital.com
SINGAPORE
PH: +65 6877-8737
FX: +65 6877-8747 sales-singapore@christiedigital.com
FRANCE
PH: +33 (0) 1 47 48 28 07
FX: +33 (0) 1 47 48 26 06
Mobile: +33 (0) 6 76 47 43 62 sales-france@christiedigital.com
GERMANY
PH: +49 2161 664540
FX: +49 2161 664546 sales-europe@christiedigital.com
CHINA
PH: +86 21 6278 7708
FX: +86 21 6278 7707 sales-china@christiedigital.com
