Christie Digital Systems XENON CONSOLE 2.2. ALLOW LAMP TO COOL , 2.3. DISCONNECT AC LINES BEFORE ENTERING CONSOLE , 2.4. DO NOT LOOK DIRECTLY AT LAMP

SLC Series Xenon Console
2-2 CHRISTIE DIGITAL SYSTEMS
August 7, 2003
2.2. ALLOW LAMP TO COOL
WARNING
If the lamp has been in use, wait at least ten minutes after shut-off
before opening the lamp housing.
The ten-minute waiting period allows the internal lamp pressure to drop to a level at which it
is safe to work while wearing the authorized protective clothing. Again, always wear
protective clothing when the protective cover is removed from the lamp.
2.3. DISCONNECT AC LINES BEFORE ENTERING CONSOLE
WARNING
Turn off the breaker at the building AC power distribution panel before
entering the console.
Always turn off and disconnect power lines before entering the console. This protects
against accidental electrical shock.
2.4. DO NOT LOOK DIRECTLY AT LAMP
WARNING
NEVER LOOK DIRECTLY AT THE LAMP!
Serious and permanent eye damage can be caused by the ultraviolet radiation of the lamp.
Never attempt to open the console while the lamp is on. Always follow directions for
opening console and exposing the Xenon lamp. (See Section 5.2.)