Chromalox PF411-10 installation instructions General, Specifications - Table A, Chromalox

Chromalox®

Installation Instructions

and

RENEWAL PARTS IDENTIFICATION

SERVICE REFERENCE

DIVISION 4		SECTION HF
SALES	(Supersedes PF411-9)		PF411-10
REFERENCE
			161-048940-001

DATE FEBRUARY, 2001

Portable Unit Blower Air Heater — Type HF

Specifications - Table A

Model		Model	Volts	Watts	Amps	Wiring	Plug
Number						Fig. No.	Fig. No.
HF203G AC		C	120V1P	1,900	15.8	6	3
HF203G AC		C	240V1P	2,000	8.3	6	4
HF303H AC*		C	120V1P	3,000	25.0	7	—
HF303G AC		C	240V1P	3,000	12.5	7	3
HF403G AC		C	240V1P	4,000	16.7	7	5
HF203EG DC		E	120V1P	1,900	15.8	9	3
HF203DG DC		E	240V1P	2,000	8.3	8	4
HF303E	DC*	E	120V1P	3,000	25.0	12	—
HF303DG DC		E	240V1P	3,000	12.5	11	4
HF403E	DC**	E	240V1P	4,000	16.7	11	—

*Cord Only, no plug.

**Without Cord and plug.

11-3/8”

1” 9-3/4”

8”

Figure 1

12-5/8”

13-3/16”

On/Off
Switch	Figure 2A
Figure 2

GENERAL

Hazard of Fire or Discoloration of Temperature Sensitive Fabrics. Keep combustible material and such fabrics away from heater. Do not operate heater where flammable vapors, gases or liquids are present. Heaters should not be operated in room temperatures above 80˚F.

Hazard of Electric Shock. Any installation involving electric heaters must be effectively grounded in accordance with the National Electrical Code. Use the required polarized wall receptacle that mates with the appropriate plug, referenced in Table A, shown in Figures 3, 4 or 5 (see Page 2).

To avoid personal injury read “IMPORTANT INSTRUCTIONS” on page 3 before installation or operation of heater.

© 2010 Chromalox®, Inc.