Keyboard Settings

Driver Configuration Options

The following describe the various options used for managing the Amzer-Professional driver.

[√] Keyboard Active – Enable/Disable connection between Amzer and Professional keyboard. Disable connection when keyboard is not being used.

[√] Enable Auto Repeat – Checking the Enable Auto Repeat checkbox switches the Auto Repeat function to on. While un- checking the Enable Auto Repeat checkbox switches the Auto Repeat function to off.

Repeat delay – The rate at which the key depression occurs is set. The available settings are Slowest, Slow, Normal, Fast, and Fastest.

Repeat rate – The rate at which key input is repeated. The range of settings is from (2 – 20) with the slowest at 2 and fastest repeat rate of 20.

Keyboard Mode – Sets the default driver input mode.

Standard mode emulates the PC style “Repeating characters” when key is held down. Auto Repeat must be enabled.

BlackBerry mode emulates the automatic- upper case characters when key is held down and insert special characters when key is held down and Up/Down arrows are pressed.

Switch KB Mode – Is a user defined short- cut key sequence used for switching between the different driver input modes.

[√] Enable mode change sound – Audible notification indicating that the driver’s input mode is about to be switched.

Sound volume – Adjust the level of the handset notification sound.

[√] Enable mode change message – Visual notification indicating that the driver’s input mode is about to change.

AmzerSmart Keyboard, User Guide v3.00 © 2006

Page 23