Keyboard Settings Continued
•Message duration – Length of time the notification message is displayed.
•Test Notification – Used to sample the audible and visual notification settings. Fine adjustments can be made before leaving the preference property page.
•[√] Connect/Disconnect sound – Enable audio warning that the keyboard connected or disconnected with driver.
•Sound volume – Adjust the level of the handset notification sound.
•[√] Enable message notification – Enable visual warning that the keyboard connected or disconnected with driver.
•[√] Automatic brightness control – Enables automatic backlight control when a key is pressed on the Professional keyboard.
•Brightness off time (sec) – To conserve the handset battery, the handset backlight can be set to automatically shutoff when no keys are pressed within the specified time. The automatic shutoff range is ( 0 – 60 ) seconds.
•Automatic brightness level (%) – Default automatic brightness level. The range is (10 – 100) percent in increments of 10%. When the backlight is automatically turned on when a key is pressed it is set to this level.
•Manual brightness adjust (%) – The default Difference level that the backlight will be set to when the backlight is manually controlled. The range is (10 – 100) percent in increments of 10%.
Brightness - Manual = Actual Brightness
Example: 100 – 50 = 50
•Manual Control – To adjust backlight brightness manually use the following short- cut keys:
[Fn] + [+] Increase Intensity
[Fn] +
•KeyPress sound type – Enable/Disable Key Press sound simulation.
•KeyPress sound volume – Adjust the level of the handset
Amzer→ Smart Keyboard, User Guide v3.00 © 2006 | Page 24 |