APN – Access Point Name is a name provided by the cellular service that allows the camera to gain access to the Internet via their network. Contact your cellular service provider for the correct value to enter here.

PIN – Some SIM cards require a 4-8 digit ‘personal identification number’. The cellular service provider will supply this number if it is required. If a PIN is not required, leave this field blank.

OBSERVER IV

Operating Mode

Image Delivery - The camera can deliver images to the internet via either Email or File Transfer Protocol (FTP). Select the desired delivery option and make sure to enter the corresponding Internet parameters on the Network Settings page.

Email delivery

FTP delivery

Activation - Every time the camera is activated it will send an image. The camera will always be activated by a signal on the external trigger line. It can also be activated internally via a user defined schedule. To enable scheduled operation click on the box below and go to the Schedule page to define those times.

Enable Schedule

Notification - The camera can provide a notification message each time it is activated via the external trigger. The notification message can be either an Email or a Short Message Service (SMS) to a cell phone. Select the mode of delivery for this message below. Only SMS notification is available if the Image Delivery option, above, has been set to Email. Go to the Network Settings page and enter the appropriate Email or SMS parameters as needed.

None

SMS

Email

Email with image

Continuous Mode - Continuous mode can be entered at startup by enabling below and setting switch #1 in the up position. Enter a delay, in minutes, between pictures (1-99).

Enable at startup. Wait 1 minutes between images

Submit Reset

This page determines how and when the Observer delivers an image and trigger notification.

Image Delivery – Select either Email or FTP delivery of images. All images from the camera will be delivered in this manner.

9