5-25
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-11350-01
Chapter5 Administering the Access PointWireless Device Access
Configuring the Access Point for Secure Shell

Clear Commands

In privileged Exec mode, use the commands in Table 5 -3 to clear DHCP server variables.

Debug Command

To enable DHCP server debugging, use this command in privileged EXEC mode:
debug ip dhcp server { events | packets | linkage }
Use the no form of the command to disable debugging for the wireless device DHCP server.
Configuring the Access Point for Secure Shell
This section describes how to configure the Secure Shell (SSH) feature.
Note For complete syntax and usage information for the commands used in this section, refer to the “Secure
Shell Commands” section in the Cisco IOS Security Command Reference for Release 12.3.

Understanding SSH

SSH is a protocol that provides a secure, remote connection to a Layer 2 or a Layer 3 device. There are
two versions of SSH: SSH version 1 and SSH version 2. This software release supports both SSH
versions. If you do not specify the version number, the access point defaults to version 2.
SSH provides more security for remote connections than Telnet by providing strong encryption when a
device is authenticated. The SSH feature has an SSH server and an SSH integrated client. The client
supports these user authentication methods:
•RADIUS (for more information, see the “Controlling Access Point Access with RADIUS” section
on page 5-9)
•Local authentication and authorization (for more information, see the “Configuring the Access Point
for Local Authentication and Authorization” section on page5-19)
For more information about SSH, refer to Part 5, “Other Security Features” in the Cisco IOS Security
Configuration Guide for Release 12.3.
Table5-3 Clear Commands for DHCP Server
Command Purpose
clear ip dhcp binding
{ address | * }
Deletes an automatic address binding from the
DHCP database. Specifying the address argument
clears the automatic binding for a specific (client)
IP address. Specifying an asterisk (*) clears all
automatic bindings.
clear ip dhcp conflict
{ address | * }
Clears an address conflict from the DHCP
database. Specifying the address argument clears
the conflict for a specific IP address. Specifying
an asterisk (*) clears conflicts for all addresses.
clear ip dhcp server statistics Resets all DHCP Server counters to 0.