Cisco Systems 1260 specifications Access Point Specifications, Category Specification

Type is always f1(hex). Length is the number of controller management IP addresses times 4 in hex. Value is the IP address of the controller listed sequentially in hex.

For example, suppose that there are two controllers with management interface IP addresses, 10.126.126.2 and 10.127.127.2. The type is f1(hex). The length is 2 * 4 = 8 = 08 (hex). The IP addresses translate to 0a7e7e02 and 0a7f7f02. Assembling the string then yields f1080a7e7e020a7f7f02. The resulting Cisco IOS command added to the DHCP scope is option 43 hex f1080a7e7e020a7f7f02.

12Access Point Specifications

Table 2 lists the technical specifications for the 1260 series access point.

Table 2	Access Point Specifications
Category		Specification
Dimensions (LxWxD)		8.68 x 8.68 x 1.84 in. (22.04 x 22.04 x 4.67 cm)
Weight		1.9 lbs (0.86 kg)
Operating temperature		–4 to 131 degrees F (–20 to 55 degrees C)
Storage temperature		–22 to 185 degrees F (–30 to 85 degrees C)
Humidity		10% to 90% (noncondensing)
Antenna		Diversity system with RP-TNC connectors for external antennas.
Compliance		The 1260 series access point complies with UL 2043 for products installed
		in a building’s environmental air handling spaces, such as above suspended
		ceilings.
Safety		UL 60950-1
		CAN/CSA C22.2 No. 60950-1
		IEC 60950-1 with all national deviations
		EN 60950-1
		UL 2043
EMI and Susceptibility		FCC Part 15.107 and 15.109 Class B
		ICES-003 Class B (Canada)
		EN 301.489
		EN 55022 Class B, 2000 version
		EN 55024
		VCCI Class B
		33