Assign IP Information to the Hub
The hub is designed to operate with little or | 4 Enter the IP address of the default |
no user intervention. In most cases, you can | gateway (for example: 10.1.105.254): |
use it with its default settings. | Enter IP default gateway: 10.1.105.254 |
|
4
Assign IP information to the hub so that you can use the Cisco 1538 Hub Manager
Contact your system administrator for the hub IP information, and record it here.
Hub IP address:
Subnet mask:
Default gateway:
1From the terminal or PC, enter Y:
Continue with configuration dialog? Y
2Enter the IP address (for example: 10.1.105.20):
Enter IP address: 10.1.105.20
3Enter the subnet mask (IP netmask) (for example: 255.255.255.0):
Enter IP netmask: 255.255.255.0
The following information is displayed:
The following configuration command script was created:
ip address 10.1.105.20 255.255.255.0 ip
!
end
5Enter Y:
Use this configuration? Y
The following information is displayed:
Building configuration...
Use the enabled mode ‘configuration’ command to modify this configuration.
Press RETURN to get started.
6Press Return.
7Exit from the terminal session.
You can now display the Cisco 1538 Hub Manager.
