Display the Cisco 1538 Hub Manager
If you have the IP address to the hub, you can display the Cisco 1538 Hub Manager from your intranet. You can use the Cisco 1538 Hub Manager to configure and monitor the hub.
1Start Netscape Communicator (4.03 or higher) or Microsoft Internet Explorer (4.01 or higher). Make sure that Java and JavaScript are enabled.
2Enter the IP address of the hub in the URL field if you are using Communicator (the Address field if you are using Internet Explorer).
The Cisco 1538 Hub Manager page appears.
Click Apply after making changes on a page. 
Click Revert to 
discard unapplied changes on 
a page.
Click Help for procedures and detailed field descriptions.
Shows when 
another hub is connected to
astacking connector on the hub.
HOME PORT GROUP IP SNMP CDP SYSTEM 
Click these topics to move from page to page. On Netscape Communicator only, when the cursor is above a topic, a
Click a port to display its settings, status, and statistics.
15374
5
Note: The Cisco 1538 Series Micro Hub 10/100 Installation and Configuration Guide and the Cisco 1538 Hub Manager online help provide complete information about the web console and describe how to configure and monitor the hub.
