Cisco Network Modules

ANALOG AND ISDN BASIC RATE VOICE NETWORK MODULES

 

 

Supported Platforms

 

 

 

and Minimum Cisco

 

Product

Description

IOS Versions

Comments

NM-HDV2-1T1/1E1

Include a built-inT1/E1 port

3800 Series – 12.3(11)T

Not supported on 12.3

High-density digital

and a VIC/WIC slot that can

3700 Series – 12.3(7)T

Mainline; only 12.3T and

voice/fax network module

be fitted to either digital

2811, 2821, and

later.

or analog/BRI voice/WAN

 

 

2851 – 12.3(8)T4

 

 

interface cards.Supports a

2691 – 12.3(7)T

 

 

maximum of 90 channels

 

 

2600XM Series – 12.3(7)T

 

 

of digital voice, or 30

 

 

 

 

 

channels of digital voice

 

 

 

and four channels of

 

 

 

analog voice in medium

 

 

 

complexity codec. Must

 

 

 

be used with up to four

 

 

 

PVDM2 Packet Fax/Voice

 

 

 

DSP modules.

 

 

 

Modular Router Solutions

 

 

 

Voice and Fax Integration

 

 

 

 

 

Cisco Network Modules

 

 

T1/E1/J1 DIGITAL VOICE NETWORK MODULES

 

 

 

 

 

 

 

Supported Platforms

 

 

 

and Minimum Cisco

 

Product

Description

IOS Versions

Comments

NM-HDV-1T1-12

Provides a single T1

3800 Series – 12.3(11)T

Prior to Cisco IOS 12.3

1-port 12-channel digitalT1

connection with support

3700 Series – 12.2(8)T

Mainline, requires a Cisco

packet voice trunk network

for 12 channels of

3660 Series – 12.0(5)XK

IOS “Plus” feature set.

medium complexity voice

12.3 Mainline and forward

module

3640 – 12.0(5)XK

compression using any

supported in “IP Voice”

 

3620 – 12.0(5)XK

 

of the following codecs:

feature set.

 

2811, 2821, and

 

G.729A, G.729AB, G.726

The NM-HDV-1T1-12 is a

 

all versions, G.711 and fax

2851 – 12.3(8)T4

 

bundle of the following

 

2691 – 12.2(8)T1

 

relay.This module can also

 

components:

 

be configured to provide

2600XM Series – 12.1(14)

 

•One network module

 

six channels of high- and

Mainline, 12.2(12)

 

medium-complexity voice

Mainline, 12.2(8)T1

(NM-HDV)

 

2650 Series – 12.1(3)T

•One one-portT1 voice/

 

compression using any

 

of the following codecs:

2620 Series – 12.0(5)XK

WAN interface card

 

G.729A, G.729AB, G.726

2610 Series – 12.0(5)XK

(VWIC-1MFT-T1)

 

all versions, G.711,

 

•One digital signal

 

G.729, G.729B, G.723.1

 

processor modules

 

all versions, G.728, GSM,

 

(PVDM-12)

 

GSMEFR, fax relay.

 

 

NM-HDV2-2T1/1E

High-density digital voice/fax network module

Includes two built-inT1/E1 ports and a VIC/VWIC slot that can be fitted with either digital or analog/BRI voice/WAN interface cards. Supports a maximum of 120 channels of digital voice, or 60 channels of digital voice and four

3800 Series – 12.3(11)T

3700 Series – 12.3(7)T

2811, 2821, and 2851 – 12.3(8)T4

2691 – 12.3(7)T

2600XM Series – 12.3(7)T

Not supported on 12.3 Mainline; only 12.3T and later.

Also supports audio- conferencing; up to 15 conferences of six partici- pants and G.729.a to G.711 transcoding of up to 60 sessions in conjunction with Cisco CallManager.

Modular Router Solutions

Voice and Fax Integration

channels of analog voice in medium complexity codec. Must be used with up to four PVDM2 Packet Fax/Voice DSP modules.

Modular Router Solutions

Voice and Fax Integration

NM-HDV-1T1-24

1-port 24-channel digitalT1 packet voice trunk network module

Provides a single T1 connection with support for 24 channels of medium complexity voice compression using any of the following codecs: G.729A, G.729AB, G.726 all versions, G.711 and fax relay.This module can also be configured to provide 12 channels of high- and medium-complexity voice compression using any of the following codecs: G.729A, G.729AB, G.726 all versions, G.711, G.729, G.729B, G.723.1 all versions, G.728, GSM, GSMEFR, fax relay.

Also supports audio- conferencing; up to 15 conferences of six partici- pants and G.729.a to G.711 transcoding of up to 60 sessions in conjunction with Cisco CallManager.

Modular Router Solutions

Voice and Fax Integration

3800 Series – 12.3(11)T

3700 Series – 12.2(8)T

3660 Series – 12.0(5)XK

3640 – 12.0(5)XK

3620 – 12.0(5)XK

2811, 2821, and 2851 – 12.3(8)T4

2691 – 12.2(8)T1

2600XM Series – 12.1(14) Mainline, 12.2(12) Mainline, 12.2(8)T1

2650 Series – 12.1(3)T

2620 Series – 12.0(5)XK

2610 Series – 12.0(5)XK

Prior to Cisco IOS 12.3 Mainline, requires a Cisco IOS “Plus” feature set.

12.3Mainline and forward supported in “IP Voice” feature set.

The NM-HDV-1T1-24 is a bundle of the following components:

•One network module (NM-HDV)

•One one-portT1 voice/ WAN interface card (VWIC-1MFT-T1)

•One digital signal processor modules (PVDM-12)

106

107

Page 55
Image 55
Cisco Systems 2800, 1800, 7300, 3700, 7200 T1/E1/J1 Digital Voice Network Modules, NM-HDV2-2T1/1E, NM-HDV-1T1-24, 106 107

1700, SOHO, 2800, 7200, 3700 specifications

Cisco Systems is a key player in the networking and communications industry, and its wide range of routers is a testament to its innovation and reliability. Among the most prominent models are the 7400, 7200, and 7300 Series routers, each with distinct features, technologies, and strengths that cater to diverse performance needs.

The Cisco 7400 Series router is designed for service providers seeking high performance and scalability in their core and edge networks. It supports up to 1.2 Terabits per second of throughput, making it well-suited for handling large volumes of data traffic. One of its hallmark features is the support for advanced service chaining, allowing operators to deploy a mix of virtual and physical functions seamlessly. Additionally, the router supports redundant power supplies and fans, ensuring high availability and reliability. The 7400 Series is also equipped with advanced security features including integrated threat intelligence capabilities, which help protect against cyber threats while maintaining the quality of service.

Next, the 7200 Series is well-known for its versatility in both enterprise and service provider environments. It supports a variety of WAN interfaces and is capable of handling multiple protocols, including IP, Frame Relay, and ATM. This router provides modularity, allowing users to tailor the hardware configuration to their specific needs with interchangeable interface cards. The 7200 Series is optimized for voice and data convergence, making it ideal for businesses that require robust support for unified communications. Additionally, it features enhanced security options, including Cisco IOS Firewall and IPS services to safeguard data integrity.

Finally, the Cisco 7300 Series router excels in providing high-performance routing for enterprises and service providers, particularly in edge routing scenarios. It offers a balance between performance and cost, with a processing capability that meets the demands of growing bandwidth needs. The 7300 Series supports various interfaces for both synchronous and asynchronous communication, making it a flexible choice for integrated network environments. It is designed to support IPv6, which is increasingly important for modern networking as organizations transition towards next-generation Internet architectures.

In summary, Cisco's 7400, 7200, and 7300 Series routers are built to meet the needs of a range of users, from large-scale service providers to medium-sized businesses. Each model brings unique capabilities to the table, providing solutions that prioritize performance, scalability, and security. As organizations continue to evolve their networking capabilities, Cisco's routers remain a go-to choice for reliable and advanced networking infrastructure.