Aironet 1300 Series Access Point/ Bridges Power Injector
A flexible outdoor wireless bridge or access−point solution is provided through the combination of the Cisco Aironet 1300 Series, a power injector, and options for both antennas and mounting. This diagram shows how the units connect.
The Power Injector LR2 converts the standard 10/100 BaseT Ethernet category 5 RJ−45 interface that is suitable for weather−protected areas to a dual F−Type connector interface for dual coaxial cables that are more suitable for harsh outdoor environments. This port is unconfigurable. While providing a 100baseT interface to the Cisco Aironet 1300 Series, the Power Injector LR2 also provides power to the unit over the same cables with a power discovery feature that protects other appliances from damage should they accidentally be connected. The ports on the switch are set for auto−speed and auto−duplex, and auto−MDIX. Port 0 on the switch is used for the coaxial link to the bridge and port 1 on the switch is used for the RJ−45 jack on the power injector. The other switch ports are unused. For more information, refer to Cisco Aironet
