17 In the Add this Web site to the Zone field, enter the IP address of the switch.
Note: If the you plan to use Cluster Management for switch configuration, you must enter the address of the cluster command switch. You can also enter the addresses of the member switches, but they are not required. If you plan to use Visual Switch Manager (VSM) for switch configuration, you must enter the IP address of each switch that you want to manage. You do not need to delete the address from the Trusted Sites list if the switch later becomes a cluster member. Refer to the Cisco IOS Desktop Switching Software Configuration Guide for more information.
18 Click Add, and then click OK.
19 In the Internet Options window, click Apply, and then click OK.
Displaying the Access Page
Once the browser is configured, display the Cluster Management Suite access page:
1 Enter the IP address of the switch in the Location field if you are using Netscape (the Address field if you are using Internet Explorer).
Note: You can cut and paste the switch IP address from the window that you used to complete the setup program.
2 Press Return. The universal access page for your switch displays.
Note: You are prompted with a message if your browser version is not supported.
3 Click Cluster Management Suite or Visual Switch Manager to display the
appropriate Cluster Management application.
For More Information
See the Catalyst 2900 Series XL Installation Guide for detailed instructions on installing the Catalyst 2900 series XL switch. See the Cisco IOS Desktop Switching Software Configuration Guide for detailed instructions on using the Cluster Management Suite and the CLI to configure and manage switches. See the release notes for recent information about the Catalyst 2900 series XL switch.
8
