13-11

Catalyst 2960 Switch Software Configuration Guide

78-16881-01

Chapter 13      Configuring VTP

Configuring VTP

Configuring a VTP Client

When a switch is in VTP client mode, you cannot change its VLAN configuration. The client switch 

receives VTP updates from a VTP server in the VTP domain and then modifies its configuration 

accordingly.

Note

If extended-range VLANs are configured on the switch, you cannot change VTP mode to client. You 

receive an error message, and the configuration is not allowed.

Caution

If all switches are operating in VTP client mode, do not configure a VTP domain name. If you do, it is 

impossible to make changes to the VLAN configuration of that domain. Therefore, make sure you 

configure at least one switch as a VTP server.

Beginning in privileged EXEC mode, follow these steps to configure the switch as a VTP client:

Use the 

no vtp mode

 global configuration command to return the switch to VTP server mode. To return 

the switch to a no-password state, use the 

no vtp password

 privileged EXEC command. When you 

configure a domain name, it cannot be removed; you can only reassign a switch to a different domain.

Note

You can also configure a VTP client by using the 

vlan database

 privileged EXEC command to enter 

VLAN database configuration mode and entering the 

vtp client 

command, similar to the second 

procedure under 

“Configuring a VTP Server” section on page 13-9

. Use the 

no vtp client

 VLAN 

database configuration command to return the switch to VTP server mode or the 

no vtp password

 

VLAN database configuration command to return the switch to a no-password state. When you configure 

a domain name, it cannot be removed; you can only reassign a switch to a different domain. 

Command

Purpose

Step 1

configure terminal

Enter global configuration mode.

Step 2

vtp mode client

Configure the switch for VTP client mode. The default setting is VTP 

server.

Step 3

vtp domain 

domain-name

 

(Optional) Enter the VTP administrative-domain name. The name can be 1 

to 32 characters. This should be the same domain name as the VTP server.

All switches operating in VTP server or client mode under the same 

administrative responsibility must be configured with the same domain 

name.

Step 4

vtp password 

password

(Optional) Enter the password for the VTP domain. 

Step 5

end

Return to privileged EXEC mode.

Step 6

show vtp status

Verify your entries in the 

VTP Operating Mode

 and the 

VTP Domain Name

 

fields of the display.

Page 263
Image 263
Open full-size image

2960 specifications

Cisco Systems 2960 series switches are a prominent solution in the networking landscape, known for their reliability, scalability, and feature-rich offerings. Ideal for small to medium-sized enterprises, these switches provide a robust foundation for network infrastructure, ensuring optimal performance and connectivity.

One of the standout features of the Cisco 2960 series is its Layer 2 switching capabilities. The switches support multiple VLANs (Virtual Local Area Networks), allowing network administrators to segment traffic efficiently and enhance security protocols. This is crucial in modern networks where managing traffic and isolating sensitive information is a priority.

The Cisco 2960 series also incorporates advanced Quality of Service (QoS) features, enabling the prioritization of critical applications and services. This functionality ensures that time-sensitive data, such as voice and video traffic, maintains a high quality of service even in congested networks. With support for IEEE 802.1p and DSCP marking, administrators can fine-tune their network performance to meet specific organizational needs.

Power over Ethernet (PoE) is another significant characteristic of the Cisco 2960 series. This feature allows switches to deliver electrical power alongside data over Ethernet cables to devices such as IP phones, wireless access points, and surveillance cameras. With PoE, organizations can reduce clutter from power cables and increase deployment flexibility for various devices.

In terms of security, the Cisco 2960 series is equipped with a range of integrated security features. The switch supports port security, 802.1X authentication, and Access Control Lists (ACLs), providing robust defenses against unauthorized access and potential network vulnerabilities. These security measures are essential for protecting sensitive data and ensuring compliance with industry regulations.

Moreover, the Cisco 2960 series offers enhanced network management capabilities with Cisco's Intelligent Network Services. This includes support for Simple Network Management Protocol (SNMP), Cisco Prime, and Embedded Event Manager (EEM), allowing for efficient monitoring, troubleshooting, and policy enforcement across the network.

Additionally, the Cisco 2960 switches provide various models and configurations, catering to different networking needs. Options include models with varying port densities, uplink configurations, and stacking capabilities, making it easy for organizations to choose solutions that align perfectly with their requirements.

In summary, the Cisco 2960 series is a versatile and essential component of modern networking environments. Its advanced features, including Layer 2 support, QoS, PoE, robust security, and diverse management tools, make it an excellent choice for organizations looking to build a strong and secure network infrastructure.