15-14

Catalyst 2960 Switch Software Configuration Guide

78-16881-01

Chapter 15      Configuring STP

Configuring Spanning-Tree Features

Beginning in privileged EXEC mode, follow these steps to disable spanning-tree on a per-VLAN basis. 

This procedure is optional.

To re-enable spanning-tree, use the 

spanning-tree vlan 

vlan-id 

global configuration command. 

Configuring the Root Switch

The switch maintains a separate spanning-tree instance for each active VLAN configured on it. A bridge 

ID, consisting of the switch priority and the switch MAC address, is associated with each instance. For 

each VLAN, the switch with the lowest bridge ID becomes the root switch for that VLAN. 

To configure a switch to become the root for the specified VLAN, use the 

spanning-tree vlan 

vlan-id 

root

 

global configuration command to modify the switch priority from the default value (32768) to a 

significantly lower value. When you enter this command, the software checks the switch priority of the 

root switches for each VLAN. Because of the extended system ID support, the switch sets its own 

priority for the specified VLAN to 24576 if this value will cause this switch to become the root for the 

specified VLAN.

If any root switch for the specified VLAN has a switch priority lower than 24576, the switch sets its own 

priority for the specified VLAN to 4096 less than the lowest switch priority. (4096 is the value of the 

least-significant bit of a 4-bit switch priority value as shown in 

Table 15-1 on page 15-4

.)

Note

The 

spanning-tree vlan 

vlan-id

 root

 global configuration command fails if the value necessary to be the 

root switch is less than 1.

Note

If your network consists of switches that both do and do not support the extended system ID, it is unlikely 

that the switch with the extended system ID support will become the root switch. The extended system 

ID increases the switch priority value every time the VLAN number is greater than the priority of the 

connected switches running older software.

Note

The root switch for each spanning-tree instance should be a backbone or distribution switch. Do not 

configure an access switch as the spanning-tree primary root.

Use the 

diameter

 keyword to specify the Layer 2 network diameter (that is, the maximum number of 

switch hops between any two end stations in the Layer 2 network). When you specify the network 

diameter, the switch automatically sets an optimal hello time, forward-delay time, and maximum-age 

time for a network of that diameter, which can significantly reduce the convergence time. You can use 

the 

hello

 

keyword to override the automatically calculated hello time.

Command

Purpose

Step 1

configure terminal

Enter global configuration mode.

Step 2

no

 

spanning-tree vlan

 

vlan-id

For 

vlan-id

, the range is 1 to 4094.

Step 3

end

Return to privileged EXEC mode.

Step 4

show spanning-tree vlan

 

vlan-id

Verify your entries.

Step 5

copy running-config startup-config

(Optional) Save your entries in the configuration file.

Page 288
Image 288
Open full-size image

2960 specifications

Cisco Systems 2960 series switches are a prominent solution in the networking landscape, known for their reliability, scalability, and feature-rich offerings. Ideal for small to medium-sized enterprises, these switches provide a robust foundation for network infrastructure, ensuring optimal performance and connectivity.

One of the standout features of the Cisco 2960 series is its Layer 2 switching capabilities. The switches support multiple VLANs (Virtual Local Area Networks), allowing network administrators to segment traffic efficiently and enhance security protocols. This is crucial in modern networks where managing traffic and isolating sensitive information is a priority.

The Cisco 2960 series also incorporates advanced Quality of Service (QoS) features, enabling the prioritization of critical applications and services. This functionality ensures that time-sensitive data, such as voice and video traffic, maintains a high quality of service even in congested networks. With support for IEEE 802.1p and DSCP marking, administrators can fine-tune their network performance to meet specific organizational needs.

Power over Ethernet (PoE) is another significant characteristic of the Cisco 2960 series. This feature allows switches to deliver electrical power alongside data over Ethernet cables to devices such as IP phones, wireless access points, and surveillance cameras. With PoE, organizations can reduce clutter from power cables and increase deployment flexibility for various devices.

In terms of security, the Cisco 2960 series is equipped with a range of integrated security features. The switch supports port security, 802.1X authentication, and Access Control Lists (ACLs), providing robust defenses against unauthorized access and potential network vulnerabilities. These security measures are essential for protecting sensitive data and ensuring compliance with industry regulations.

Moreover, the Cisco 2960 series offers enhanced network management capabilities with Cisco's Intelligent Network Services. This includes support for Simple Network Management Protocol (SNMP), Cisco Prime, and Embedded Event Manager (EEM), allowing for efficient monitoring, troubleshooting, and policy enforcement across the network.

Additionally, the Cisco 2960 switches provide various models and configurations, catering to different networking needs. Options include models with varying port densities, uplink configurations, and stacking capabilities, making it easy for organizations to choose solutions that align perfectly with their requirements.

In summary, the Cisco 2960 series is a versatile and essential component of modern networking environments. Its advanced features, including Layer 2 support, QoS, PoE, robust security, and diverse management tools, make it an excellent choice for organizations looking to build a strong and secure network infrastructure.