31-3

Catalyst 2960 Switch Software Configuration Guide

78-16881-01

Chapter 31      Troubleshooting

Recovering from a Lost or Forgotten Password

Step 8

If you had set the console port speed to anything other than 9600, it has been reset to that particular 

speed. Change the emulation software line speed to match that of the switch console port.

Step 9

Load any helper files:

switch: 

load_helper

Step 10

Start the file transfer by using the Xmodem Protocol.

switch: 

copy xmodem: flash:

image_filename.bin

Step 11

After the Xmodem request appears, use the appropriate command on the terminal-emulation software to 

start the transfer and to copy the software image into flash memory.

Step 12

Boot the newly downloaded Cisco IOS image.

switch:

boot flash:

image_filename.bin

Step 13

Use the 

archive download-sw

 privileged EXEC command to download the software image to the 

switch.

Step 14

Use the 

reload

 privileged EXEC command to restart the switch and to verify that the new software image 

is operating properly.

Step 15

Delete the flash:

image_filename.bin

 file from the switch.

Recovering from a Lost or Forgotten Password

The default configuration for the switch allows an end user with physical access to the switch to recover 

from a lost password by interrupting the boot process during power-on and by entering a new password. 

These recovery procedures require that you have physical access to the switch.

Note

On these switches, a system administrator can disable some of the functionality of this feature by 

allowing an end user to reset a password only by agreeing to return to the default configuration. If you 

are an end user trying to reset a password when password recovery has been disabled, a status message 

shows this during the recovery process.

These sections describes how to recover a forgotten or lost switch password:

•

Procedure with Password Recovery Enabled, page 31-4

•

Procedure with Password Recovery Disabled, page 31-6

You enable or disable password recovery by using the 

service

 

password-recovery 

global configuration 

command. Follow the steps in this procedure if you have forgotten or lost the switch password. 

Step 1

Connect a terminal or PC with terminal-emulation software to the switch console port.

Step 2

Set the line speed on the emulation software to 9600 baud.

Step 3

Power off the switch. 

Step 4

Reconnect the power cord to the switch and, within 15 seconds, press the 

Mode

 button while the System 

LED is still flashing green. Continue pressing the 

Mode

 button until the System LED turns briefly amber 

and then solid green; then release the 

Mode

 button. 

Page 577
Image 577
Open full-size image

2960 specifications

Cisco Systems 2960 series switches are a prominent solution in the networking landscape, known for their reliability, scalability, and feature-rich offerings. Ideal for small to medium-sized enterprises, these switches provide a robust foundation for network infrastructure, ensuring optimal performance and connectivity.

One of the standout features of the Cisco 2960 series is its Layer 2 switching capabilities. The switches support multiple VLANs (Virtual Local Area Networks), allowing network administrators to segment traffic efficiently and enhance security protocols. This is crucial in modern networks where managing traffic and isolating sensitive information is a priority.

The Cisco 2960 series also incorporates advanced Quality of Service (QoS) features, enabling the prioritization of critical applications and services. This functionality ensures that time-sensitive data, such as voice and video traffic, maintains a high quality of service even in congested networks. With support for IEEE 802.1p and DSCP marking, administrators can fine-tune their network performance to meet specific organizational needs.

Power over Ethernet (PoE) is another significant characteristic of the Cisco 2960 series. This feature allows switches to deliver electrical power alongside data over Ethernet cables to devices such as IP phones, wireless access points, and surveillance cameras. With PoE, organizations can reduce clutter from power cables and increase deployment flexibility for various devices.

In terms of security, the Cisco 2960 series is equipped with a range of integrated security features. The switch supports port security, 802.1X authentication, and Access Control Lists (ACLs), providing robust defenses against unauthorized access and potential network vulnerabilities. These security measures are essential for protecting sensitive data and ensuring compliance with industry regulations.

Moreover, the Cisco 2960 series offers enhanced network management capabilities with Cisco's Intelligent Network Services. This includes support for Simple Network Management Protocol (SNMP), Cisco Prime, and Embedded Event Manager (EEM), allowing for efficient monitoring, troubleshooting, and policy enforcement across the network.

Additionally, the Cisco 2960 switches provide various models and configurations, catering to different networking needs. Options include models with varying port densities, uplink configurations, and stacking capabilities, making it easy for organizations to choose solutions that align perfectly with their requirements.

In summary, the Cisco 2960 series is a versatile and essential component of modern networking environments. Its advanced features, including Layer 2 support, QoS, PoE, robust security, and diverse management tools, make it an excellent choice for organizations looking to build a strong and secure network infrastructure.