31-10

Catalyst 2960 Switch Software Configuration Guide

78-16881-01

Chapter 31      Troubleshooting

Recovering from a Command Switch Failure

Step 4

Enter the password of the 

failed command switch.

Step 5

Use the setup program to configure the switch IP information. 

This program prompts you for IP address information and passwords. From privileged EXEC mode, 

enter 

setup

,

 

and press 

Return

.

Switch# 

setup

         --- System Configuration Dialog ---

Continue with configuration dialog? [yes/no]: y

At any point you may enter a question mark '?' for help.

Use ctrl-c to abort configuration dialog at any prompt.

Default settings are in square brackets '[]'.

Basic management setup configures only enough connectivity

for management of the system, extended setup will ask you

to configure each interface on the system

Would you like to enter basic management setup? [yes/no]: 

Step 6

Enter 

Y 

at the first prompt.

The prompts in the setup program vary depending on the switch you selected to be the command switch: 

Continue with configuration dialog? [yes/no]: 

y

or

Configuring global parameters:

If this prompt does not appear, enter 

enable

, and press 

Return

. Enter 

setup

, and press 

Return

 to start 

the setup program.

Step 7

Respond to the questions in the setup program.

When prompted for the hostname, recall that on a command switch, the hostname is limited to 28 

characters. Do not use 

-n

, where 

n

 is a number, as the last characters in a hostname for any switch.

When prompted for the Telnet (virtual terminal) password, recall that it can be from 1 to 25 alphanumeric 

characters, is case sensitive, allows spaces, but ignores leading spaces.

Step 8

When prompted for the 

enable secret

 and 

enable

 passwords, enter the passwords of the 

failed command 

switch

 again.

Step 9

When prompted, make sure to enable the switch as the cluster command switch, and press 

Return

.

Step 10

When prompted, assign a name to the cluster, and press 

Return

.

The cluster name can be 1 to 31 alphanumeric characters, dashes, or underscores.

Step 11

When the initial configuration displays, verify that the addresses are correct.

Step 12

If the displayed information is correct, enter 

Y

, and press 

Return

. 

If this information is not correct, enter 

N

, press 

Return

,

 

and begin again at Step 9. 

Step 13

Start your browser, and enter the IP address of the new command switch. 

Step 14

From the Cluster menu, select 

Add to Cluster

 to display a list of candidate switches to add to the cluster.

Page 584
Image 584
Open full-size image

2960 specifications

Cisco Systems 2960 series switches are a prominent solution in the networking landscape, known for their reliability, scalability, and feature-rich offerings. Ideal for small to medium-sized enterprises, these switches provide a robust foundation for network infrastructure, ensuring optimal performance and connectivity.

One of the standout features of the Cisco 2960 series is its Layer 2 switching capabilities. The switches support multiple VLANs (Virtual Local Area Networks), allowing network administrators to segment traffic efficiently and enhance security protocols. This is crucial in modern networks where managing traffic and isolating sensitive information is a priority.

The Cisco 2960 series also incorporates advanced Quality of Service (QoS) features, enabling the prioritization of critical applications and services. This functionality ensures that time-sensitive data, such as voice and video traffic, maintains a high quality of service even in congested networks. With support for IEEE 802.1p and DSCP marking, administrators can fine-tune their network performance to meet specific organizational needs.

Power over Ethernet (PoE) is another significant characteristic of the Cisco 2960 series. This feature allows switches to deliver electrical power alongside data over Ethernet cables to devices such as IP phones, wireless access points, and surveillance cameras. With PoE, organizations can reduce clutter from power cables and increase deployment flexibility for various devices.

In terms of security, the Cisco 2960 series is equipped with a range of integrated security features. The switch supports port security, 802.1X authentication, and Access Control Lists (ACLs), providing robust defenses against unauthorized access and potential network vulnerabilities. These security measures are essential for protecting sensitive data and ensuring compliance with industry regulations.

Moreover, the Cisco 2960 series offers enhanced network management capabilities with Cisco's Intelligent Network Services. This includes support for Simple Network Management Protocol (SNMP), Cisco Prime, and Embedded Event Manager (EEM), allowing for efficient monitoring, troubleshooting, and policy enforcement across the network.

Additionally, the Cisco 2960 switches provide various models and configurations, catering to different networking needs. Options include models with varying port densities, uplink configurations, and stacking capabilities, making it easy for organizations to choose solutions that align perfectly with their requirements.

In summary, the Cisco 2960 series is a versatile and essential component of modern networking environments. Its advanced features, including Layer 2 support, QoS, PoE, robust security, and diverse management tools, make it an excellent choice for organizations looking to build a strong and secure network infrastructure.