Introduction
Introduction
The release of Network Registrar 3.0(1)T contains the following components:
•
•
•
•
•
•
•
•
•
Network Registrar Concepts Guide
Getting Started with Network Registrar
Network Registrar CLI Reference Guide
Network Registrar User’s Guide
Cisco Network Registrar 3.0 AIX Installation
Cisco Network Registrar 3.0 HP-UX Installation
Network Registrar Web GUI Installation Instructions
Release Notes for Network Registrar 3.0(1)T
Network Registrar includes Windowsâ NT servers, CLI, and GUI, and Solarisâ servers, CLI, and a Motifâ GUI, and AIXâ and
You can run the servers and the associated user interfaces on the appropriate platform, or you can run the servers on one platform and the user interfaces on another.
System Requirements
Network Registrar 3.0(1)T runs on Windows NT 4.0, Solaris 2.5.1, and Solaris 2.6. Network Registrar’s 3.0(1)T GUI also runs on Windows 95.
For all OS platforms, Cisco recommends that you install the current service pack (Windows) or recommended patch cluster (Solaris).
•Windows NT 4.0 must be run with service pack 3, or for Y2K compliance, on service pack 4.
•Solaris 2.5.1 has been tested with the recommended patch cluster that was current on February 11, 1998. In particular, it was tested with these patches installed:
Table 1 | Solaris 2.5.1 Patches |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2Release Notes for Cisco Network Registrar 3.0(1)T
