16
•The dual-purpose uplink ports establish a link through
either the SFP module port or the 10/100/1000BASE-T
port,but not both at the same time. An SFP module port has
precedence over a 10/100/1000BASE-T port. If an SFP
module port has a link, that link is active. If the SFP port
does not have a link and the 10/100/1000BASE-T port
does,that link is active. Reselection occurs when the active
link is disconnected.
For a list of supported modules, see the Catalyst Express 500
Switch Release Notes on Cisco.com. For detailed instructions
oninstalling, removing, and connecting to SFP modules, see the
documentation that accompanied the module.
13 More information
This section includes information about the device manager,
troubleshooting, and the Cisco warranty terms.