E-10
Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-24582-01
AppendixE Installing the Wall Mount for the Cisco Unified IP Phone 6901 a nd 6911
Installing a Wall Mount for the Cisco Unified IP Phone 6911
Step2 Attach the phone bracket to the IP Phone (Figure E-9).
a. Detach the handset cord (and headset cord, if there is a headset), power cord, and any other attached
cords from the base of the phone.
b. Remove the label covers that are concealing the screw holes.
c. Attach the phone bracket by inserting the tabs into the mounting tabs on the phone. The phone’s
ports should be accessible through the holes in the bracket.
d. Secure the phone bracket to the IP Phone with the Phillips-head screws.
e. Thread the handset cord (and headset cord, if using one). Reattach the cords and seat them in the
clips incorporated into the phone body.
FigureE-9 Attaching the Phone Bracket
274937
Screw holes
Slot for
mounting tabs