E-2
Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-24582-01
AppendixE Installing the Wall Mount for the Cisco Unified IP Phone 6901 a nd 6911
Installing a Wall Mount for the Cisco Unified IP Phone 6901
Before You Begin
Before you mount the phone on the wall, ensure that the handset rest is such that the receiver will not
slip out of the cradle (Figure E-2).
FigureE-2 Preparing the Handset Hookswitch

21 3

192897

4

1Remove the handset from the cradle and pull the plastic tab from the handset rest.
2Rotate the tab 180 degrees.
3Hold the tab between two fingers, with the corner notches facing you. Make sure the tab lines up
evenly with the slot in the handset cradle. (FigureE-2).
4Press the tab evenly into the slot. An extension protrudes from the top of the rotated tab. Return
the handset to the handset rest.