Cisco Systems 700 Series quick start

Corporate Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Cisco 700 Series Router Cabling and SetupQuick Start Guide

This document describes the basic process of cabling and configuring the Internet access device, the

Cisco 700 series router. For advanced cabling information, refer to theCisco 700 Series Router

Installation Guide. For advanced configuration information, refer to theCisco 700 Series Router

Command Referenceand the Cisco 700 Series Router Software Conﬁguration Guide. These documents can

be found on the Cisco Documentation CD-ROM and Cisco Connection Online (CCO).

•One Cisco 700 series router

•One yellow Ethernet cable

•One red ISDN U cable (Cisco 776 routers only)

•One orange ISDN S/T cable (Cisco 761 and 775 routers only)

•One RJ-45-to-RJ-11 adapter

•One blue config cable

•One black power supply

•One black power supply cord

•One Cisco Fast Step CD-ROM

Note Additional parts might be required to install Cisco775 and Cisco 776 routers. An Ethernet

crossovercable must be used to connect a hub to the router. Depending on the country, you

might need a phone port adapter to connect an analog telephone. These parts must be

provided by the user.