Cisco Systems 700 System Mode Parameter Set, Profile Mode Parameter Set, System Parameter Set

System Mode Parameter Set

All profiles are based on the profile template and inherit the system-level values. When you create a new profile, its default values are taken from the profile template.

System Mode Parameter Set

System mode parameters affect the router as a system. Table 2-1 lists the system parameters.

Table 2-1	System Parameter Set
Caller ID parameters		Call waiting	PPP1 parameters
Date and time		Country group	Screen length
Directory number(s)		Address age time	Screen echo
Delay time		Local and remote access	SNMP2 parameters
Forwarding mode		Phone 1 and 2	SPIDs3
Multidestination dialing		PPP client password	Switch type
Numbering plan		PPP client secret	System password
Patterns		Voice priority	Power Source 1 detect
Passthru		Compression	System name
PPP authentication

1PPP = Point-to-Point Protocol

2SNMP = Simple Network Management Protocol

3SPID = service profile identifier

Profile Mode Parameter Set

Changes made to profile mode parameters in system mode affect the profile template. When a profile is created, it inherits the matching system mode parameters from the profile template. Any changes to parameters in profile mode apply only to that profile. Changes made to profile parameters in system mode are stored in the profile template. When you use the set user command to create a user-defined profile, the default parameters for the new profile are taken from system mode.

Using Profiles with Cisco 700 Series Routers 2-3