Cisco Systems 760 quick start Connect the Ethernet Cable to a Computer or Hub

2Connect the Ethernet Cable to a Computer or Hub

Option 1: To connect the Ethernet cable to a computer, go to option 1 below.

Option 2: To connect the Ethernet cable to a hub, go to option 2 below.

Option 1 Connect the Ethernet Cable to a Computer

1 Connect the yellow Ethernet cable to the

		yellow	port labeled ETHERNET on the
	rear panel of your router.
2	Connect the other end of the cable to the
	Ethernet connector on the back of your
	computer.
3	Set the node-hub switch to the “HUB”
	position.

CONFIG

10BASET

1

NODE

HUB

CISCO 776

ISDN S/T

S 0

+5V ---1.5A +/-5%

-30V---

0.2A +/-25%

4

2

Option 2 Connect the Ethernet Cable to a Hub

1 Connect the yellow Ethernet cable to the

2

3

yellow port labeled ETHERNET on the rear panel of your router.

Connect the other end of the cable to an available port on your Ethernet hub.

Set the node-hub switch to the “NODE” position.

CONFIG	10BASET
			CISCO 776
	NODE	HUB	ISDN S/T	ISDN U

1
3	S	0	NT-1

Ethernet cable

+5V ---1.5A +/-5% -30V--- 0.2A +/-25%

2Ethernet hub