Cisco Systems 7902G warranty Making Conference Calls, Hold

Basic Call Handling

Making Conference Calls

Use the Conference button to set up a standard conference. A standard conference allows from 3 to 16 people to participate in a single call. See the table below for details.

Note Your phone line must be configured for two calls for you to use Hold with Conference as described here. Your system administrator can confirm whether your phone is configured to support one or two calls.

If you want to...	Then...
Invite current callers to join a	During a conference call, you receive a new call. Press				(Hold)
standard conference	to put the conference call on hold. Answer the new call.
	Press	(Conference) to add the caller to the conference.
Start a conference call by calling	During a connected call, press			(Conference) to add another
participants	party to the call. Doing so automatically activates a new line and
	puts the first party on hold. Place a call to another number. After
	the call connects and you have spoken to the conference
	participant, press		(Conference) again to add this party to
	your call. Follow this procedure to add each participant.
Add a participant to an existing	During a conference call, press			(Hold). Doing so
conference call	automatically activates a new line and puts the conference on hold.
	Place a call to another number.
	After the call connects and you have spoken to the person,
	press	(Conference) to add this person to your call.
	Then press		(Conference) again to rejoin the conference call.
Join a conference	Answer the phone when it rings. You do not need to do anything
	special to join a standard conference call.
End a conference	Hang up the handset.

Note You cannot drop a participant from a conference call even if you initiate the conference.

Cisco IP Phone 7902G for Cisco CallManager 11