478-16335-01
Connecting Your Phone
Your system administrator will likely connect your new CiscoIP Phone to the corporate IP telephony
network. If that is not the case, refer to the graphic and table below to connect your phone.
Caution If you plan to power your phone locally (instead o f receiving power thorough the Ether net
connection), use only a Cisco 48 volt power supply designed to work with a
CiscoIPPhone.
1Network (Ethernet) port (10 BASE T) 2Handset port
3DC adaptor port (DC48V) 4Power supply with DC output connector (Optional.
Required only if power is not supplied through an
Ethernet connection.)
5Power cable with wall AC plug.
Provided if your phone uses external
power
2
3
5
4
1
79976