Cisco Systems 7975 quick start

Quick Start

Using the Cisco Unified IP Phone 7975 with Cisco StadiumVision

In your luxury suite, the Cisco Unified IP Phone 7975

can be used to control the TVs and to place calls. It has

a touch screen, softkeys (which change depending on

the screen contents and your site’s implementation), a

navigation pad, and a phone keypad.

Use the touch screen to select the TVs or

select a service.

Use the softkeys to:

• Navigate.

• Mute or unmute all TVs with single touch.

• Turn on and off all TVs with single touch.

The navigation pad is not used with Cisco

StadiumVision Director TV control s ervices.

Use the keypad to dial a phone number or

enter a channel number.

Use the line buttons to select a phone line (if

multiple), speed dial, or go to a defined URL.

To control the TVs, touch TV/Volume.

The TVs are typically identified by location. Touch the

label of the TV you want to control or touch All.

Touch desired channel, or touch the Page Up or Page

Down arrows to see additional channels.

NOTE: The Back softkey will take you back to the

previous operational screen. To scroll through multiple

listing pages, use the Page Up or Down arrows.

As an alternative, you can touch Guide to view the

channel guide on the associated TV, or touch Keypad

and enter a desired channel number.

To adjust the volume, touch the following buttons:

 To increase the volume on the selected

TV(s).

 To decrease the volume on the selected

TV(s).

 To toggle between mute and unmute on the

selected TV(s).