Warning

Do not operate your wireless network device near unshielded blasting caps or in an

 

 

 

explosive environment unless the device has been modified to be especially qualified for

 

 

 

such use. Statement 245B

 

 

 

 

 

 

 

 

Warning

In order to comply with FCC radio frequency (RF) exposure limits, antennas should be

 

 

 

located at a minimum of 7.9 inches (20 cm) or more from the body of all persons.

 

 

 

Statement 332

 

 

 

 

 

 

Caution

Do not use the supplied plastic wall anchors to mount the access point on a ceiling

 

 

 

because they will not support the weight of the access point. The fasteners used must be

 

 

 

capable of maintaining a minimum pullout force of 20 lbs (9 kg) and must use all 4

 

 

 

indented holes on the low-profile mounting bracket.

 

 

 

 

 

Caution

This product and all interconnected equipment must be installed indoors within the same

 

 

 

building, including the associated LAN connections as defined by Environment A of the

 

 

 

IEEE 802.af Standard.

 

 

 

 

Note The access point is suitable for use in environmental air space in accordance with section 300.22.C of the National Electrical Code and sections 2-128, 12-010(3), and 12-100 of the Canadian Electrical Code, Part 1, C22.1. You should not install the power supply or power injector in air handling spaces.

Note Use only with listed ITE equipment.

3

Page 3
Image 3
Cisco Systems AIRAP1041NAK9 specifications Such use. Statement 245B