Chapter 19 Managing the AIP SSM and CSC SSM
Transferring an Image onto an SSM
hostname# show module 1 |
|
|
|
|
|
|
| |
Mod | Card Type |
|
|
|
| Model |
| Serial No. |
1 | ASA 5500 Series Security Services |
| JAB100301NE | |||||
Mod | MAC Address Range |
|
| Hw Version | Fw Version | Sw Version | ||
1 | 0015.c6fa.2c0f to 0015.c6fa.2c0f | 1.0 |
| 1.0(10)0 | CSC | SSM 6.0 (Build#1349) | ||
Mod | SSM Application Name | Status |
| SSM Application | Version | |||
1 | CSC SSM |
| Down |
| 6.0 (Build#1349) |
| ||
Mod | Status | Data Plane Status | Compatibility |
|
| |||
|
| |||||||
1 | Up | Up |
|
|
|
|
|
|
The argument 1, at the end of the command, is the slot number occupied by the SSM. If you do not know the slot number, you can omit it and see information about all modules, including the adaptive security appliance, which is considered to occupy slot 0 (zero).
Use the details keyword to view additional information for the SSM.
The follow example output is from an adaptive security appliance with a CSC SSM installed.
hostname# show module 1 details
Getting details from the Service Module, please wait...
ASA 5500 Series Security Services
Model: | ||
Hardware version: | 1.0 | |
Serial Number: | JAB100301NE | |
Firmware version: | 1.0(10)0 | |
Software version: | CSC SSM 6.0 (Build#1349) | |
MAC Address Range: | 0015.c6fa.2c0f to 0015.c6fa.2c0f | |
App. name: | CSC SSM | |
App. Status: | Up | |
App. Status Desc: | CSC SSM scan services are available | |
App. version: | 6.0 (Build#1349) | |
Data | plane Status: | Up |
Status: | Up | |
HTTP | Service: | Up |
Service: | Up | |
FTP | Service: | Up |
Activated: | Yes | |
Mgmt | IP addr: | 10.23.62.92 |
Mgmt | web port: | 8443 |
Peer | IP addr: | <not enabled> |
Transferring an Image onto an SSM
For an intelligent SSM, such as AIP SSM or CSC SSM, you can transfer application images from a TFTP server to the SSM. This process supports upgrade images and maintenance images.
Note If you are upgrading the application on the SSM, the SSM application may support backup of its configuration. If you do not back up the configuration of the SSM application, it is lost when you transfer an image onto the SSM. For more information about how your SSM supports backups, see the documentation for your SSM.
| Cisco Security Appliance Command Line Configuration Guide |
|