| Administrator |
| Fiery | Fiery | |
Task | Administrator message field | response subject | response message | ||
subject field | |||||
|
| field | field | ||
|
|
| |||
|
|
|
|
| |
To receive | #Help |
| RE: Help | Provides | |
help for |
|
|
| troubleshooting | |
Fiery |
|
|
| ||
services |
|
|
|
| |
|
|
|
|
|
Printing a Configuration page from the Control Panel
The Configuration page lists all the settings in effect in the current Setup.
After you have finished running Setup, print a Configuration page to confirm your settings. You can also do this from Command WorkStation. (See page
After you make changes to Setup and choose Exit Setup, the system restarts. This allows the Fiery to recognize the new settings and display them properly on the Configuration page. Allow the system to restart and return to Idle before printing a Configuration page. In particular, the restart is necessary if you specified the DHCP or BOOTP protocol to obtain an IP address automatically for the Fiery.
Post the current Configuration page near the server for quick reference. Users need the information on this page, such as the current printer default settings.
Other information pages you can print include the Test Page, Font List, and Job Log.
See Chapter 3 of the Job Management Guide.
TO PRINT THE CONFIGURATION PAGE
1.With the printer in the READY state, press the 
key to select the Print Information Menu, then press the ENTER key to select it.
2.Press the 
key to select Configuration, then press the ENTER key to print a configuration page.