Accessing Setup options
TO ACCESS SETUP WHEN THE FIERY IS IDLE
1.With the printer in the ‘Ready’ state, press the 
or 
keys until the Admin Setup Menu is displayed, then press the ENTER key.
2.If an administrator password has been set up you will be prompted for it. Enter the correct administrator password and press the ENTER key to gain access to the Setup menus.
Press the 
or 
keys to choose each character of the password and press ENTER to advance to the next character. Pressing ENTER after the last character completes
password entry.
For
1 – Server Setup
2 – Network Setup
3 – Printer Setup
After the administrator password has been successfully entered if necessary, these and other Setup menus can be accessed using the 
or 
keys. Press the ENTER key to select the required menu when its name is displayed.
After performing these Setups, you can continue with the remaining Setups, or exit Setup and save your changes.
About the Control Panel Setup interface
When you perform Setup from the Control Panel, you select one menu after another using the 
or 
keys and pressing ENTER to select the required menu. In each menu enter information about your Fiery and your network and printing environment.