44-5 Server Setup options

Server Setup options

The Server Setup menu lets you specify system information that pertains to the Fiery and all users. To access the menu, follow the instructions on page 4-3.

When you choose Server Setup, the options appear in sequence, as follows. Default values, where applicable, appear in square brackets. Words shown in italics indicate that a product- or site-specific value is displayed.

Server Name

Default server name

Enter a name for the Fiery (up to 15 characters long). This name appears in the Chooser on an AppleTalk network.

System Date

Enter the correct system date in the form DD/MM/YY. The date appears on the Job Log.

System Time

Enter the correct system time. Enter the time based on the 24-hour clock in the form HH:MM (Hours:Minutes). The time appears on the Job Log.

Time Zone

Specify the correct time zone. Select from a list of major cities and standard time zones.

Location

Specify where the printer is located e.g. Office, 4th Floor.

Print Start Page

Yes/No [Yes]

Specify whether the Fiery should print a start page every time it restarts. The start page displays information about the Fiery, including the server name, current date and time, amount of memory installed in the Fiery, network protocols enabled, and connections published.