Cisco Systems CISCO1805 Connect the Router, Ethernet cables, Cable adapter, Console cable

Connect the Router

Connect the Router

To set-up and connect your router, follow these steps:

Step 1 Verify that the following items were shipped with your router:

1	Ethernet cables	3	Cable adapter
2	Console cable	4	AC power cord

	SLOT 1			FE 0/1	CONSOLE	SLOT 0		CISCO 1805
				FDX			DS
				100			US	LINK
HWIC				LINK				POWER
4ESW					HWIC-		ONLINE
PWR 3x LNK	PWR 2x LNK PWR 1x LNK	PWR 0x LNK		FDX	CABLE-D-2	CABLE
				100
				LINK
		CF	AIM	FE 0/0	AUX
DO NOT REMOVE DURING NETWORK OPERATION

12

4

3

F connector (Cable TV In)

To cable source

231998

Step 2 To connect up to four PC to the router, connect the Ethernet cable from the Ethernet switch ports to the PC.

Step 3 To configure the router through the Cisco IOS command-line interface (CLI), connect the router console port to a terminal or PC.

Step 4 To connect to an ISP, attach one end of the cable adapter to the Cisco cable modem HWIC (high-speed WAN interface card) and the other to the cable source.

Step 5 Connect the power cord as shown. Move the power switch to the ON position.

The following indications appear:

•The green SYS PWR LED on the front of the chassis lights up.

•The fan operates.

Cisco 1805 DOCSIS 2.0 Cable Router Quick Start Guide

2 78-18313-01