1-15
Cisco 7204 Installation and Configuration Guide
OL-5101-02
Chapter1 Product Overview Physical Description
Figure1-12 I/O Controller LEDs and CPU Reset Button—without Fast Ethernet Port
ITable1-5 I/O Controller LEDs
LED Function
IO Power OK Indicates that the I/O controller is on and receiving DC power from the router
midplane. This LED comes on during a successfu l route r boot an d remain s on
during normal operation of the router.
Enabled Indicates that the network processing engine and the I/O controller are
enabled for operation by the system; however, it does not mean that the Fast
Ethernet port on the I/O controller is functional or enabled. This LED comes
on during a successful router boot and remains on during normal operation of
the router.
FE Enable Indicates that the Fast Ethernet port on the I/O controller is initialized and
enabled for operation by the system. This LED comes on after the I/O
controller has been enabled and remains on during normal operation of the
router.
FE Link Indicates that the Fast Ethernet port on the I/O controller has established a
valid link with the network. This LED remains off during normal operation of
the router, unless there is an incoming carrier signal.
MII EN Indicates that the Fast Ethernet port’s MII ports is initialized and enabled by
the system, and configured for operation. This LED comes on after the I/O
controller has been enabled and the MII port has been configured as the media
type for the Fast Ethernet port (the RJ-45 port is the default me dia type for
the Fast Ethernet port). This LED remains on during normal operation of the
router.
RJ45 EN Indicates that the Fast Ethernet port’s RJ-45 port (the default media type for
the Fast Ethernet port) is initialized and enabled by the system. This LED
comes on after the I/O controller has been enabled and remains on during
normal operation of the router.
AUX
CONSOLE
PCMCIA
EJECT
SLOT 0
CPU RESET
IO POWER
OK
SLOT 1
INPUT/OUTPUT CONTROLLER
H7401
SLOT 0
SLOT 1
CPU RESET
IO POWER
OK
ENABLED
ENABLED